Tools for a beginner – what you really need

· updated · Topics: Tools, Basics

Drawing: screwdrivers, tweezers and a loupe side by side

Beginners buy too much. I did too. A set of “62 watchmaker tools” for 25 euros contained exactly three useful things. The rest lives in a drawer.

What I really use every evening after six weeks:

  • Screwdrivers from 0.6 to 2.0 mm. Better a few good ones than many bad ones. I dress the blades myself on an Arkansas stone.
  • Two tweezers: brass ones for screws, fine steel ones for everything else. The tips must close exactly.
  • A loupe with 3.5× magnification for working, and a 10× one for checking.
  • Rodico, the green putty. It removes fingerprints and dust and holds small parts. I would not want to work without it.
  • A plastic movement holder, so the movement does not slide around.
  • A case opener for screw-backs, and a proper case knife for snap-backs – not the kitchen knife.
  • A white, matte mat. Parts that fall on the floor are found again only half of the time.

What I do not need (yet): a lathe, an ultrasonic cleaner, a timegrapher. The first months are only about taking a movement apart and putting it back together without parts left over.

Update, October 2026: two and a half years later the list is still true. Added since: a 0.5 mm screwdriver for very small movements, a timegrapher, a demagnetiser and an old staking set. Still no lathe.

Comments are closed on this site. If you want to tell me something, see the notes page.