Kienzle Markant: the first attempt

· Topics: Kienzle, Repair

For my first real strip-down I wanted a watch that nobody would miss. A Kienzle Markant from the seventies, hand-wound, with a pin-lever escapement (Stiftanker), three euros from a bargain box. Kienzle built millions of these in Schwenningen, and they are as robust as a tractor.

I photographed every step with my phone, from above. That was the best decision of the evening.

What happened

  1. Stem out, movement out of the case. Went fine.
  2. Hands off, dial off. Bent the minute hand slightly.
  3. Balance off. Here I touched the hairspring – the Spiralfeder. It is no longer quite flat.
  4. Barrel, train wheels, pallet fork. Everything into a tray with compartments.
  5. Cleaning in lighter fluid with a brush, drying on kitchen paper.
  6. Reassembly. Took three evenings.

And then: it ran! For five minutes, then it stopped. I suspect the hairspring I bent, or that I did not oil anything at all, because I did not have any oil yet.

I still learned a lot. Mostly that patience is not a saying, it is a tool. And that you never, never touch a hairspring.

Next step: buy oils and learn where each one goes.

Comments are closed on this site. If you want to tell me something, see the notes page.