The Junghans runs again

· Topics: Junghans, Repair

Drawing: a plain wristwatch dial with baton markers

In March 2024 I bought a Junghans for eight euros and decided not to touch it until I knew what I was doing. Two and a half years and about forty watches later, the time had come.

Diagnosis after opening: the mainspring was broken, somewhere in the middle. That explains why it never ran. Otherwise: old, gummed oil, and a jewel in the train with a small crack that still holds.

I found a new mainspring with the right dimensions at a parts dealer. Height, thickness, length and the diameter of the barrel – four numbers you have to measure exactly with the calliper first. I am a surveyor. That was the easy part.

The rest was routine, as they say: take apart, clean, oil, assemble. Three evenings. I noticed that this time I did not need a single photo to check.

Timegrapher: +9 seconds a day, 255 degrees. I also fitted a new crystal, but the knife scratches on the caseback stay. They belong to it now.

I have worn it every day for a week. Eight euros, two and a half years. It was worth it.

Comments are closed on this site. If you want to tell me something, see the notes page.