Fitting an acrylic crystal
The Ruhla with date, my garden watch, has been through a lot. The crystal looked like frosted glass, and you could only guess the time. January is a good month for small jobs, so I ordered a new one.
Old watches like this have acrylic crystals, not glass. They are pressed into the case under tension. To get them in and out you need a crystal press or, as I have, a crystal lift – a tool with claws that squeezes the crystal a little so it becomes smaller.
How it went
- Measure the old crystal with the calliper: 30.0 mm. Order 30.1 mm, because the new one must sit tight.
- Old crystal out with the crystal lift. Easy.
- Clean the case groove with a toothpick and Rodico.
- New crystal in. First try: I pressed too hard on one side, and it cracked. Second crystal, slower, and it clicked into place.
Small scratches on an acrylic crystal can be polished away with a bit of polishing paste and a cloth. I did that on two other watches the same afternoon. They look ten years younger.
Tip for myself: always order two crystals.
Comments are closed on this site. If you want to tell me something, see the notes page.