Broken balance staff – what now?

· Topics: Ruhla, Repair

Drawing: a balance wheel with hairspring seen from above

It happened with the blue Ruhla, the one I had already demagnetised. While putting the balance in, my tweezers slipped, the balance tilted, and there was a quiet, very unpleasant crack. One pivot of the balance staff was gone.

The balance staff is the axle the balance turns on. Its pivots are thinner than a hair. When one breaks, the watch stops.

The options

  • Fit a new staff. That is the correct solution. The old staff has to be riveted out of the balance wheel and a new one riveted in. Without a lathe and practice: no chance.
  • Take it to a watchmaker. Would cost more than the watch was ever worth.
  • A complete balance from a donor movement. This is exactly what I keep the donor movements for.

I chose the third option. The donor balance fitted, but the hairspring was adjusted differently. After an hour with the regulator and the timegrapher, the watch now gains 20 seconds a day. For a pin-lever watch, that is excellent.

Lesson: for the balance, I now put the tweezers down and work with a piece of Rodico. Slower, but nothing cracks.

Comments are closed on this site. If you want to tell me something, see the notes page.